24V DC U15A Linear Actuator 3300N-4700N Push Pull for CSP Tower System

24V DC U15A Linear Actuator 3300N-4700N Push Pull for CSP Tower System

3,300–4,700N Push & Pull Load for CSP Heliostat Positioning

The TOMUU U15A is a 24V DC linear actuator designed for CSP tower and heliostat tracking applications requiring controlled linear movement and project-specific positioning.

With a rated push and pull load range of 3,300–4,700N, speed options from 1.17–3.34mm/s and standard Hall signal feedback, the U15A can be selected according to heliostat structure, stroke and installation requirements.

Key Features

Technical Specifications

3,300–4,700N Push & Pull Load for CSP Tracking

The U15A rated operating load is 3,300–4,700N in both push and pull directions. This is the primary working load range used when evaluating the actuator for heliostat positioning.

The actuator also has a maximum static load of 15,000N, which refers to static loading conditions and should not be interpreted as the rated operating load.

Load & Speed Selection

Load and speed should be evaluated together when selecting an actuator for a CSP heliostat structure. The required configuration depends on the mechanical geometry, stroke and positioning requirements of the project.

Final load and speed configuration should be confirmed according to the heliostat structure and project requirements.

Hall Signal Feedback for Position Monitoring

Hall signal feedback is provided as the standard feedback configuration for the U15A, supporting actuator movement monitoring during CSP heliostat adjustment.

Feedback requirements should be evaluated together with the control system, stroke and required positioning logic of the project.

U15A Stroke & Installation Selection

The U15A minimum installation dimension is based on Stroke + 275mm ±5mm. The standard front mounting configuration uses a Ø14mm hole.

Stroke and installation dimensions should be selected according to available mounting space, heliostat geometry and the required adjustment range.

TOMUU Experience in Solar Thermal Projects

TOMUU actuator solutions have been applied in solar thermal tracking projects requiring mechanical positioning and controlled movement of heliostat structures.

Manufacturing & Engineering

TOMUU combines actuator manufacturing, application engineering and product testing to support solar thermal and heliostat tracking applications.

CSP heliostat actuator selection should consider load, speed, stroke, installation geometry, adjustment range and feedback requirements together. Final configuration depends on the mechanical design of the tracking structure.

Select the Right U15A Configuration for Your CSP System

To evaluate the right actuator configuration for your CSP tower or heliostat tracking system, please provide the required load, speed, stroke, installation dimensions, adjustment range, feedback requirements and project quantity .

You can also review our Linear Actuator Selection Guide before sending your project information.

Related Resources