U18A Linear Actuator Without Motor For Solar Tracker
U18A is designed for multi-point linkage solar tracker, which is without motor. It is very strong and applied for hard situation.
Max. Load: 15,000N (push); 15,000N (pull)
Max. Static Load: 50,000N(when fully retracted)
Speed: 1.4mm/r±5%
Min. Installation Dimension: 300mm+S
IP Protection: IP66
Max. Load: 15,000N (push); 15,000N (pull)
Max. Static Load: 50,000N(when fully retracted)
Speed: 1.4mm/r±5%
Min. Installation Dimension: 300mm+S
IP Protection: IP66
Description
U18A linear actuator without motor is designed for multi-point linkage solar tracker. It has 15,000N dynamic push/pull load, and 50,000N static load capacity. With IP66 rated and hight and low temperature grease, U18A linear actuator without motor could work properly in very hard environment, like desert. Usually, U18A is used in 1 raw by 1pcs, which tracks sun from east to west, and several raws are connected by square tube. And then use 1 motor to drive them.
Parameter
Dimension
U18A linear actuator without motor is designed for multi-point linkage solar tracker. It has 15,000N dynamic push/pull load, and 50,000N static load capacity. With IP66 rated and hight and low temperature grease, U18A linear actuator without motor could work properly in very hard environment, like desert. Usually, U18A is used in 1 raw by 1pcs, which tracks sun from east to west, and several raws are connected by square tube. And then use 1 motor to drive them.
Parameter
Code | Torque | Rated Load (N) | Speed(mm/r) | |
Push | Pull | |||
A | 24.3N·m | 15,000 | 15,000 | 1.4 |
Dimension

Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.